ASTM A312
Glomet Stainless supplies seamless, ERW and EFW pipes in austenitic stainless steel to ASTM A312 / ASME SA312, duplex and super duplex pipes to ASTM A790, and titanium and nickel alloy pipes to their ASTM B specifications.
Common sizes in 304/304L and 316/316L are held in stock in 6 m lengths. Pipes are supplied with plain, bevelled or threaded ends, cut to length where needed, and every length is marked with grade, size and heat number to match its mill test certificate.
Dual-grade 304/304L and 316/316L pipe for most process lines; H grades and 321/347 for high temperature service.
TP304/304LTP316/316LTP321TP347TP310SFor seawater, produced water and offshore piping where chloride stress corrosion cracking is a risk.
S31803S32205S32750S32760Condenser and heat exchanger tubing for seawater cooling, chlorine and oxidising acid duty.
Gr 1Gr 2Gr 5Gr 7Gr 12For sour gas, sulphuric and hydrochloric acid lines, furnace tubes and caustic service.
Inconel 600/625Incoloy 800/825Monel 400C276Ni 200| Grade | C | Mn | Si | P | S | Cr | Ni | Mo | N | Other |
|---|---|---|---|---|---|---|---|---|---|---|
| TP 304 | 0.08 | 2.00 | 1.00 | 0.045 | 0.030 | 18.0–20.0 | 8.0–11.0 | – | – | – |
| TP 304L | 0.035 | 2.00 | 1.00 | 0.045 | 0.030 | 18.0–20.0 | 8.0–13.0 | – | – | – |
| TP 316 | 0.08 | 2.00 | 1.00 | 0.045 | 0.030 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | – | – |
| TP 316L | 0.035 | 2.00 | 1.00 | 0.045 | 0.030 | 16.0–18.0 | 10.0–14.0 | 2.00–3.00 | – | – |
| TP 321 | 0.08 | 2.00 | 1.00 | 0.045 | 0.030 | 17.0–19.0 | 9.0–12.0 | – | – | Ti 5×(C+N) – 0.70 |
| TP 310S | 0.08 | 2.00 | 1.00 | 0.045 | 0.030 | 24.0–26.0 | 19.0–22.0 | 0.75 | – | – |
| 904L (N08904) | 0.020 | 2.00 | 1.00 | 0.040 | 0.030 | 19.0–23.0 | 23.0–28.0 | 4.0–5.0 | – | Cu 1.0–2.0 |
| Duplex S31803 | 0.030 | 2.00 | 1.00 | 0.030 | 0.020 | 21.0–23.0 | 4.5–6.5 | 2.5–3.5 | 0.08–0.20 | – |
| Duplex S32205 | 0.030 | 2.00 | 1.00 | 0.030 | 0.020 | 22.0–23.0 | 4.5–6.5 | 3.0–3.5 | 0.14–0.20 | – |
| Super Duplex S32750 | 0.030 | 1.20 | 0.80 | 0.035 | 0.020 | 24.0–26.0 | 6.0–8.0 | 3.0–5.0 | 0.24–0.32 | Cu 0.50 |
| Grade | Ni | Cr | Mo | Fe | Cu | C | Mn | Si | Other |
|---|---|---|---|---|---|---|---|---|---|
| Titanium Gr 2 | – | – | – | 0.30 | – | 0.08 | – | – | O 0.25, N 0.03, H 0.015, Ti bal. |
| Titanium Gr 5 | – | – | – | 0.40 | – | 0.08 | – | – | Al 5.5–6.75, V 3.5–4.5, O 0.20, Ti bal. |
| Inconel 600 | 72.0 min | 14.0–17.0 | – | 6.0–10.0 | 0.50 | 0.15 | 1.00 | 0.50 | S 0.015 |
| Inconel 625 | 58.0 min | 20.0–23.0 | 8.0–10.0 | 5.0 | – | 0.10 | 0.50 | 0.50 | Nb+Ta 3.15–4.15 |
| Incoloy 800 | 30.0–35.0 | 19.0–23.0 | – | 39.5 min | 0.75 | 0.10 | 1.50 | 1.00 | Al 0.15–0.60, Ti 0.15–0.60 |
| Incoloy 825 | 38.0–46.0 | 19.5–23.5 | 2.5–3.5 | 22.0 min | 1.5–3.0 | 0.05 | 1.00 | 0.50 | Ti 0.6–1.2 |
| Monel 400 | 63.0 min | – | – | 2.50 | 28.0–34.0 | 0.30 | 2.00 | 0.50 | S 0.024 |
| Hastelloy C276 | Balance | 14.5–16.5 | 15.0–17.0 | 4.0–7.0 | – | 0.010 | 1.00 | 0.08 | W 3.0–4.5, Co 2.5 |
| Nickel 200 | 99.0 min | – | – | 0.40 | 0.25 | 0.15 | 0.35 | 0.35 | S 0.01 |
Weight %, maximum unless a range is shown. The mill test certificate supplied with each heat is the controlling document.
| Grade | Tensile Strength (MPa, min) | Yield Strength 0.2% (MPa, min) | Elongation (% in 50 mm, min) | Hardness (max) |
|---|---|---|---|---|
| TP 304 | 515 | 205 | 35 | – |
| TP 304L | 485 | 170 | 35 | – |
| TP 316 | 515 | 205 | 35 | – |
| TP 316L | 485 | 170 | 35 | – |
| TP 321 | 515 | 205 | 35 | – |
| TP 310S | 515 | 205 | 35 | – |
| 904L (N08904) | 490 | 215 | 35 | – |
| Duplex S31803 | 620 | 450 | 25 | 290 HBW / 30 HRC |
| Duplex S32205 | 655 | 485 | 25 | 290 HBW / 30 HRC |
| Super Duplex S32750 | 800 | 550 | 15 | 300 HBW / 32 HRC |
| Grade | Tensile Strength (MPa, min) | Yield Strength 0.2% (MPa, min) | Elongation (%, min) | Condition |
|---|---|---|---|---|
| Titanium Gr 2 | 345 | 275 | 20 | Annealed |
| Titanium Gr 5 | 895 | 828 | 10 | Annealed |
| Inconel 600 | 550 | 240 | 30 | Annealed |
| Inconel 625 | 827 | 414 | 30 | Annealed (Grade 1) |
| Incoloy 800 | 520 | 205 | 30 | Annealed |
| Incoloy 825 | 586 | 241 | 30 | Annealed |
| Monel 400 | 483 | 193 | 35 | Annealed |
| Hastelloy C276 | 690 | 283 | 40 | Solution Annealed |
| Nickel 200 | 380 | 103 | 35 | Annealed |
Longitudinal tensile values at room temperature. Nickel alloy limits depend on size and finish (hot or cold finished) — confirm against the ordered specification.





Tell us the grade, NB size, schedule, seamless or welded, length and quantity. We quote with stock availability and delivery time.