Cross-reference between AISI / common names, UNS, Werkstoff Nr., EN and JIS designations.
| Grade | UNS | Werkstoff Nr. | EN Designation | JIS |
|---|---|---|---|---|
| SS 304 | S30400 | 1.4301 | X5CrNi18-10 | SUS 304 |
| SS 304L | S30403 | 1.4307 / 1.4306 | X2CrNi18-9 | SUS 304L |
| SS 304H | S30409 | 1.4948 | X6CrNi18-10 | SUS 304H |
| SS 316 | S31600 | 1.4401 | X5CrNiMo17-12-2 | SUS 316 |
| SS 316L | S31603 | 1.4404 | X2CrNiMo17-12-2 | SUS 316L |
| SS 316Ti | S31635 | 1.4571 | X6CrNiMoTi17-12-2 | SUS 316Ti |
| SS 317L | S31703 | 1.4438 | X2CrNiMo18-15-4 | SUS 317L |
| SS 321 | S32100 | 1.4541 | X6CrNiTi18-10 | SUS 321 |
| SS 347 | S34700 | 1.4550 | X6CrNiNb18-10 | SUS 347 |
| SS 310S | S31008 | 1.4845 | X8CrNi25-21 | SUS 310S |
| SS 410 | S41000 | 1.4006 | X12Cr13 | SUS 410 |
| SS 430 | S43000 | 1.4016 | X6Cr17 | SUS 430 |
| SS 904L | N08904 | 1.4539 | X1NiCrMoCu25-20-5 | SUS 890L |
| Duplex 2205 | S31803 / S32205 | 1.4462 | X2CrNiMoN22-5-3 | SUS 329J3L |
| Super Duplex 2507 | S32750 | 1.4410 | X2CrNiMoN25-7-4 | – |
| Super Duplex Zeron 100 | S32760 | 1.4501 | X2CrNiMoCuWN25-7-4 | – |
| Titanium Gr 2 | R50400 | 3.7035 | – | TP340 |
| Titanium Gr 5 | R56400 | 3.7165 | – | TAP6400 |
| Inconel 600 | N06600 | 2.4816 | NiCr15Fe | NCF 600 |
| Inconel 625 | N06625 | 2.4856 | NiCr22Mo9Nb | NCF 625 |
| Incoloy 800 | N08800 | 1.4876 | X10NiCrAlTi32-21 | NCF 800 |
| Incoloy 825 | N08825 | 2.4858 | NiCr21Mo | NCF 825 |
| Monel 400 | N04400 | 2.4360 | NiCu30Fe | NW 4400 |
| Hastelloy C276 | N10276 | 2.4819 | NiMo16Cr15W | – |
| Nickel 200 | N02200 | 2.4066 | Ni99.2 | NW 2200 |
Equivalents are close but not always identical in chemistry — always order against the specific standard and grade your design calls for.
Outside diameter and wall thickness in mm per ASME B36.19M.
| NPS | DN | OD (mm) | SCH 5S | SCH 10S | SCH 40S | SCH 80S |
|---|---|---|---|---|---|---|
| 1/4" | 8 | 13.72 | – | 1.65 | 2.24 | 3.02 |
| 3/8" | 10 | 17.15 | – | 1.65 | 2.31 | 3.20 |
| 1/2" | 15 | 21.34 | 1.65 | 2.11 | 2.77 | 3.73 |
| 3/4" | 20 | 26.67 | 1.65 | 2.11 | 2.87 | 3.91 |
| 1" | 25 | 33.40 | 1.65 | 2.77 | 3.38 | 4.55 |
| 1 1/4" | 32 | 42.16 | 1.65 | 2.77 | 3.56 | 4.85 |
| 1 1/2" | 40 | 48.26 | 1.65 | 2.77 | 3.68 | 5.08 |
| 2" | 50 | 60.33 | 1.65 | 2.77 | 3.91 | 5.54 |
| 2 1/2" | 65 | 73.03 | 2.11 | 3.05 | 5.16 | 7.01 |
| 3" | 80 | 88.90 | 2.11 | 3.05 | 5.49 | 7.62 |
| 4" | 100 | 114.30 | 2.11 | 3.05 | 6.02 | 8.56 |
| 5" | 125 | 141.30 | 2.77 | 3.40 | 6.55 | 9.53 |
| 6" | 150 | 168.28 | 2.77 | 3.40 | 7.11 | 10.97 |
| 8" | 200 | 219.08 | 2.77 | 3.76 | 8.18 | 12.70 |
| 10" | 250 | 273.05 | 3.40 | 4.19 | 9.27 | 12.70 |
| 12" | 300 | 323.85 | 3.96 | 4.57 | 9.53 | 12.70 |
Larger sizes and heavier schedules (SCH 120, 160, XXS) follow ASME B36.10M — ask us for the size you need.
Theoretical weights for austenitic stainless steel at a density of 7.93 g/cm³.
| Material | Density (g/cm³) | Multiply SS 304 weight by |
|---|---|---|
| SS 304 / 304L | 7.93 | 1.00 |
| SS 316 / 316L | 7.98 | 1.01 |
| Duplex 2205 | 7.80 | 0.98 |
| Titanium Gr 2 | 4.51 | 0.57 |
| Inconel 625 | 8.44 | 1.06 |
| Monel 400 | 8.80 | 1.11 |
| Hastelloy C276 | 8.89 | 1.12 |
Theoretical values for estimating only. Invoiced weight is the actual weight of the material supplied.
Common mill and polished finishes for stainless steel flat products.
| Finish | Process | Appearance | Typical Use |
|---|---|---|---|
| No.1 | Hot rolled, annealed & pickled | Dull, slightly rough | Plates, tanks, industrial equipment |
| 2D | Cold rolled, annealed & pickled | Uniform dull matt | Deep drawn parts, industrial use |
| 2B | Cold rolled, annealed, pickled & skin passed | Smooth, semi-reflective | General fabrication, process equipment |
| BA | Bright annealed in controlled atmosphere | Bright, highly reflective | Kitchenware, appliances, trim |
| No.4 | Polished with 150–180 grit abrasive | Satin / brushed | Kitchen equipment, architecture |
| Hairline (HL) | Long continuous abrasive lines | Fine directional grain | Lift panels, interiors, facades |
| No.8 | Successive polishing and buffing | Mirror | Decorative panels, signage, reflectors |
The specifications we supply against most often, by product.
ASTM A240 / ASME SA240 — Cr and Cr-Ni stainless plate, sheet and strip for pressure vessels. ASTM A480 — general requirements.
A240A480B265 (Ti)ASTM A312 — seamless and welded austenitic pipe. A358 — EFW pipe. A213 / A269 — tubes. A790 — duplex pipe.
A312A358A213A269A790ASTM A276 — stainless bars and shapes. A479 — bars for boilers and pressure vessels. A484 — general requirements.
A276A479A484B348 (Ti)ASTM A403 — wrought austenitic fittings. A815 — duplex fittings. Dimensions to ASME B16.9 (buttweld) and B16.11 (forged).
A403A815B16.9B16.11ASTM A182 — forged flanges, fittings and valve parts. Dimensions to ASME B16.5 (to 24") and B16.47 (26"–60").
A182B16.5B16.47EN 1092-1ASTM A193 — bolting for high temperature or pressure. A194 — nuts. ISO 3506 — A2 / A4 property classes.
A193A194F593ISO 3506Send us the grade and standard — we will share the specification limits or a sample mill test certificate.