Exporter • Supplier • Stockist of Stainless Steel GLOMET STAINLESS

Stainless Steel Plates

Stainless steel plates stocked by Glomet Stainless ASME SA240
Product Overview

SS, Titanium & Nickel Plates

Glomet Stainless supplies hot rolled annealed and pickled plates (No.1 finish) and cold rolled plates in stainless steel, duplex, titanium and nickel alloys. Plates are supplied to ASTM A240 / ASME SA240, and to ASTM B265 or the matching ASTM B specification for titanium and nickel grades.

Take full mill plates, or let us plasma, waterjet or gas cut blanks, circles, rings and flange blanks to your drawing. Pressure vessel plates are supplied with heat-traceable mill test certificates, and ultrasonic testing can be arranged on request.

3 – 100 mmThickness Range
Up to 2500 × 12000 mmPlate Size
Profile CutCircles, Rings & Blanks

01 Specifications

StandardASTM A240 / ASME SA240, ASTM A480
Titanium / NickelASTM B265 / B168, B443, B409, B424, B127, B575, B162
Thickness3 mm – 100 mm (heavier on request)
Width1250, 1500, 2000, 2500 mm
Length2500, 3000, 6000 mm up to 12000 mm
FinishNo.1 (HRAP), 2B, No.4
FormHot Rolled, Cold Rolled, Chequered
ConditionSolution Annealed & Pickled
CuttingPlasma, Waterjet, Gas & Shearing
Cut ShapesBlanks, Circles, Rings, Flange Blanks
TestingUT, PMI, IGC — on request
Test CertificateEN 10204 3.1; 3.2 on request

02 Grades

Austenitic & Martensitic Stainless
SS 304SS 304LSS 304HSS 316SS 316LSS 316TiSS 317LSS 321SS 347SS 310SSS 410SS 904L
Duplex & Super Duplex
Duplex 2205 (S31803 / S32205)Super Duplex 2507 (S32750)Super Duplex S32760
Titanium
Titanium Gr 1Titanium Gr 2Titanium Gr 5Titanium Gr 7Titanium Gr 12
Nickel Alloys
Inconel 600Inconel 625Incoloy 800 / 800HIncoloy 825Monel 400Hastelloy C276Nickel 200 / 201

03 Materials

Stainless Steel
Austenitic SS Plates
ASTM A240 / ASME SA240

Dual-certified 304/304L and 316/316L plates cover most vessel and tank work; 321, 347 and 310S for elevated temperature.

304/304L316/316L321347310S
Duplex
Duplex & Super Duplex Plates
ASTM A240 / ASME SA240

Higher strength lets designers reduce wall thickness on vessels, while improving chloride pitting resistance.

S31803S32205S32750S32760
Titanium
Titanium Plates
ASTM B265 / ASME SB265

Used for tube sheets, seawater and chlor-alkali equipment where stainless steels pit or crack.

Gr 1Gr 2Gr 5Gr 7Gr 12
Nickel Alloys
Nickel Alloy Plates
ASTM B168, B443, B409, B424, B127, B575, B162

For furnaces, acid service, flue gas desulphurisation and marine equipment.

Inconel 600/625Incoloy 800/825Monel 400C276Ni 200

04 Chemical Composition

GradeCMnSiPSCrNiMoNOther
3040.082.000.750.0450.03018.0–20.08.0–10.5–0.10–
304L0.0302.000.750.0450.03017.5–19.58.0–12.0–0.10–
3160.082.000.750.0450.03016.0–18.010.0–14.02.00–3.000.10–
316L0.0302.000.750.0450.03016.0–18.010.0–14.02.00–3.000.10–
3210.082.000.750.0450.03017.0–19.09.0–12.0–0.10Ti 5×(C+N) – 0.70
310S0.082.001.500.0450.03024.0–26.019.0–22.0–––
904L0.0202.001.000.0450.03519.0–23.023.0–28.04.0–5.00.10Cu 1.0–2.0
Duplex 2205 (S32205)0.0302.001.000.0300.02022.0–23.04.5–6.53.0–3.50.14–0.20–
Super Duplex 2507 (S32750)0.0301.200.800.0350.02024.0–26.06.0–8.03.0–5.00.24–0.32Cu 0.50
GradeNiCrMoFeCuCMnSiOther
Titanium Gr 2–––0.30–0.08––O 0.25, N 0.03, H 0.015, Ti bal.
Titanium Gr 5–––0.40–0.08––Al 5.5–6.75, V 3.5–4.5, O 0.20, Ti bal.
Inconel 60072.0 min14.0–17.0–6.0–10.00.500.151.000.50S 0.015
Inconel 62558.0 min20.0–23.08.0–10.05.0–0.100.500.50Nb+Ta 3.15–4.15
Incoloy 80030.0–35.019.0–23.0–39.5 min0.750.101.501.00Al 0.15–0.60, Ti 0.15–0.60
Incoloy 82538.0–46.019.5–23.52.5–3.522.0 min1.5–3.00.051.000.50Ti 0.6–1.2
Monel 40063.0 min––2.5028.0–34.00.302.000.50S 0.024
Hastelloy C276Balance14.5–16.515.0–17.04.0–7.0–0.0101.000.08W 3.0–4.5, Co 2.5
Nickel 20099.0 min––0.400.250.150.350.35S 0.01

Weight %, maximum unless a range is shown. The mill test certificate supplied with each heat is the controlling document.

05 Mechanical Properties

GradeTensile Strength (MPa, min)Yield Strength 0.2% (MPa, min)Elongation (% in 50 mm, min)Hardness (max)
30451520540201 HBW / 92 HRB
304L48517040201 HBW / 92 HRB
31651520540217 HBW / 95 HRB
316L48517040217 HBW / 95 HRB
32151520540217 HBW / 95 HRB
310S51520540217 HBW / 95 HRB
904L4902203590 HRB
Duplex 2205 (S32205)65545025293 HBW / 31 HRC
Super Duplex 2507 (S32750)79555015310 HBW / 32 HRC
GradeTensile Strength (MPa, min)Yield Strength 0.2% (MPa, min)Elongation (%, min)Condition
Titanium Gr 234527520Annealed
Titanium Gr 589582810Annealed
Inconel 60055024030Annealed
Inconel 62582741430Annealed (Grade 1)
Incoloy 80052020530Annealed
Incoloy 82558624130Annealed
Monel 40048319335Annealed
Hastelloy C27669028340Solution Annealed
Nickel 20038010340Annealed

Room temperature values for annealed plate. Limits can vary with thickness — confirm against the ordered specification.

06 Applications

Pressure vessels in a chemical plant
Pressure Vessels
Stainless steel storage tanks
Storage Tanks
Pharmaceutical process equipment
Process Equipment
Structural stainless steel
Structural
Heavy plate fabrication
Heavy Fabrication
  • Pressure vessel shells, dished ends and columns
  • Heat exchanger tube sheets and baffles
  • Storage tanks for chemicals, food and water
  • Flange blanks, rings and machined components
  • Offshore, desalination and marine structures
  • Furnace parts and high temperature fixtures

Get a Price for Plates

Share the grade, thickness, plate size or cutting drawing and quantity. We quote with stock availability and delivery time.

Request a Quote
Head Office

Plot No. 1534, Road No. 17, Sector KWC,
Steel Market, Kalamboli, Panvel,
Navi Mumbai – 410 218, Maharashtra, India